NB!! There is no extra wire or antenna on our CDI that will give away the CDI! Our CDI is identical to the original and has a range of 30 m!!
To avoid mistakes, the text below:
Since 2018, the scooter has been equipped with a Euro4 (injection) engine, so it no longer has a CDI, but an ECU or an EFI (also available in our webshop). The CDI is suitable for all Chinese models before 2018, with alternating current CDI and a speed sensor on the clutch flywheel.
WE HAVE THE LATEST IMPROVED VERSION!!
The only one in the Netherlands with the 32 & 45 km version, so that you can continue driving in the limited mode. For the 10 inch Retro Scooter
CDI for all Chinese 4 stroke scooters with double connection.
Plug and Play, absolutely no technical knowledge required, telephone support possible.
The operation is as follows: When starting, the limiter is automatically ON.
Would you like to limit the scooter to 45 km per hour? while driving the button A have to press.
If you want to limit the scooter again, you have to press the button B Press it, or simply turn the scooter off and on, then it will also return to 32 km per hour
Our CDI comes from the same factory as the original CDI, on the outside this CDI is identical to the original, there are no antennas or set screws that reveal the CDI.
Do not attach your remote control to your keys, as the key ring is often thrown, which can damage the remote control, making it impossible for you to unlock the scooter.
NB. DOES NOT WORK ON KYMCO,SYM OR PEUGEOT.
An investment that pays for itself. Please note, there are new rules. If your scooter is running too fast, your scooter will receive a WOK notification from the RDW, and your license plate will be confiscated. In addition to the fine, your scooter must be re-inspected by the RDW.
Although you can easily lose 400 euros with this joke. This is a thing of the past with this CD.
Electronic parts cannot be exchanged
Even after installing the 32 & 45 km CDI, your scooter can run faster than 25 p/h
This can have several causes.
1. The odometer of the retro scooter has not been calibrated and has a deviation of 5 km upwards.
2. You have the wrong tire size on the back.
3. The boundary wire of your pulse generator is disconnected.
4. Any vari rings or intake manifold restrictors have been removed.
5. Pulse generator transmits wrong signal.
6. For clarity, the CDI works as a slave for the pulse generator, CDI receives the command from the pulse generator to which it responds. Without the speed sensor/pulse generator the CDI will not be able to work.
Scooters and mopeds:
This CDI unit with remote control limiter is only suitable for the following models:
E.g. ZNEN, Bella, Fosti, IVA, BTC, AGM, San Remo, Grand Retro
agm, alpina di renania, asya, baron, bs moto, cindy, dado, edwards, easyscoot, fosti, goes, killerbee, luuko, modena, motormania, benda, pegasso, rover bikes, scootermania, tamoretti, techno classic, vastro, viraggio , wlie, yeis, yuki, zhongneng, rrscooters, znen, 50 retro, as50qt-e, bella 50, bella exclusive, br50qt-e, bs50-4, classic, custom, dd50qt-e, dls2, ft50qt-e, sensa, sixties, techno classic, ys50qt-e, zn50qt-e.25, zn50qt-e.25 bella, zn50qt-e2, zn50qt-e3, zn50qt-e3.25, v660, wl50qt-e3, Q Retro, rover classic, viraggio, retro, bt49qt, VOM, ZNEN, Pronto. And all other names.
Perfect plus the clear explanation and instructions made me dare to take on the adventure